To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyses reviews to verify trustworthiness.
Used these toggles to mount a TV Wall Mount on a metal stud, and works perfectly! Comes with bolts with 1/4-20 Fastener size, and easy to snap off once the anchors are in place. Holds very well! I highly recommend! A+++
I have 42" TV I wanted to mount on drywall. I couldn't find a stub in the wall, so I decided to buy these babies. I marked the holes of the TV mount frame on the wall. Got a 1/2 Inch Drill bit and drill my holes on the wall and boom put these anchor on. It worked. I used a smaller drill bit first (3/8) to start the hole and then use the 1/2 inch drill bit to finish the hole on the drywall, this give you more accuracy when you are drilling your hole. I didn't experience the anchor to be weak when installing them on the wall. however, they brake easy if you bend it up or down; so,do not bend it when you are installing it. The plastic was engineered to brake easy with flexion, but to be strong with tension. I pull it with a lot of force when installing, and I mean a lot, and the plastic never broke. but as soon as I bend it like 70 degrees it broke like like a cracker. when installing pull perpendicular to wall (to yourself) and don't bend the plastic of the anchor. I used six and none of them broke, quite an achievement, since I tend to brake everything, lol. therefore, don't be afraid to pull the plastic end to the wall towards the wall, if I couldn't brake it you wont either, believe me. after you put it in in the hole bend it up and down and it will brake very easy, that's what I said don't bend it when you are installing it. I read a review complaining about that the thread of the anchor sometimes can be bad. I didn't experience any problem like that. if you are concern about that insert the screw on the anchor and verify the thread is OK. Also, if you want to take extra precaution, when you are drilling your screw in, start very slow until you feel the screw is spinning free in the hole of the anchor. Strongly recommended this product
The product works great. The only problem is , that if you bought 10 of these things, five of them would break. I'm talking about the white plastic guide bars breaking. A few of the screws stripped the plastic when I tried to tighten them. I'm using them to hold up my 75 inch TV so they seem to work pretty good. Get a couple of extra because fifty percent of them break. The ones that don't break work pretty good. They need to improve on their quality control.
These work BETTER than I thought they would. They are well-designed, super easy to install, and appear to be very strong. I'm a stickler on value, and these are worth the greater cost. If you take pride in your inner handyman and don't count your own labor as free these things will make you happy.
UPDATE: I still love these things, but be aware of this problem I encountered. When putting them into an exterior wall it is crucial that you get the threaded nut part as flat as you can on the inside of the wall. If you get a lump of fiberglass insulation under one side of the toggle part it won't line up properly with the bolt. It also helps to pull the leads and push the gripping part down exceptionally hard to help assure you're lining up the threads/not part properly. If you blow it on one, you can crush it with a pair of pliers and pull it out, then try again in the same hole.
Bar none, this is the best solution for anchoring something heavy into a hollow wall or ceiling. The Toggler Snaptoggle is super easy to install, very fast, and several times stronger than a traditional toggle bolt. In comparison to a plastic drywall anchor or a Molly bolt, there's no comparison at all. One thing that's particularly nice about the Toggler Snaptoggle is that the anchor, once placed, stays in place, even if the screw is removed. With a regular toggle bolt, removing the screw means starting over. I can't recommend this product more highly.