|Package Dimensions||30 x 28.4 x 3.4 cm; 598.74 Grams|
|Item Weight||599 g|
|Is Discontinued By Manufacturer||No|
|Date First Available||19 September 2018|
Comgrow Creality Heated Bed Build Surface Tempered Glass Plate 235x235x3mm for 3D Printer Ender 3 Ender3 Pro Ender3X
Enhance your purchase
- Excellent adhesion: The glass plate covered by microporous coating, shows strong adhesion in printing,no need to use glue .
- Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.
- Convenience: Adhesion will reduce after cooling,models will be easy to take off,no tool needed ,and this glass plate is very easy to celan by alcohol/water.
- No-indentation Printing: We upgrade to new version ,CREALITY logo is much smaller and near the bottom than older version, do not worry your works will imprinted with logo.
- Compatibility: This glass bed is perfectly suitable for creality ender 3, ender 3 pro,ender 3-X,ender 5,CR-20 CR-20 Pro 3D printer.
Frequently bought together
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
After finish printing, the viscosity of the platform will gradually decrease as the temperature decreases.
Once the print has been finished,do not try to remove the model from the glass bed immediately by force!!
When the glass bed come down to room temperature model will be easy to take off.
Attempting to forcibly remove the print from the glass bed at high temperature will damage the microporous coating.
1.Clamp the platform to the printer's hot bed.
2.Place a piece of A4 paper on the platform for leveling, and the distance between the nozzle and the platform keeps the A4 paper moving freely.
3.Clean the platform surface with alcohol/water (If there is sweat or oil on the platform, which will lead to stickiness.).The suggested bed temperature settings for different filaments:
2. Flexible filament: 50-70ºC
3. ABS:100-125ºC ( 110ºC is recommended )
4. PC:100-130ºC ( 120ºC is recommended )
5. Nelon:90-120ºC ( 110ºC is recommended )
6. PP:100-130ºC ( 120 ºC is recommended )
7. PETG: 50-70ºC
Material: ( Special Glass + microporous coatings )
Item size: ( 235*235*3mm)
Review this product
Top reviews from Australia
There was a problem filtering reviews right now. Please try again later.
Watch out when using the Ender's spatula with this bed, you will easily scratch it.
Only issue I had is that this should be bundled with clips to attach the glass onto the printer bed. I had to make a quick visit to my local Woolies to get a pack -- note - DO NOT buy those clips on Amazon, they're overpriced here. Woolies was just a couple bucks. Size 19mm works well
I was surprised that being a solid glass sheet, it didn't make my print bed level/flat, so I still have a few dips in the surface, meaning I will need to get an auto bed leveler at some point to get properly formed prints.
Another issue was there was no instructions included about how to set up the printer with the new bed on it. I ended up on Youtube to figure out that you need to adjust the Z axis stop switch to cope with the extra thickness etc as there is not enough adjustment in the bed to do this.
Also, a few prints where the nozzle was right on the bed have left scars on the print surface that don't seem to really affect adhesion or build quality but are a bit "meh" in terms of aesthetics.
All that said.. the glass beds are pretty good and I'll continue to use mine over the stock print surface any day.
Allows for 3d printing straight to the bed, no need for adhesive assistance, things stick to it when heated, and then pop right off as it cools.
Perfect size for the Ender 3 bed, great if you have any issues with the aluminium bed being flat and level, this will sit right on top and about guaranteed to be level.
Only issue is you may have some cooler/warmer spots on the glass if your aluminium bed is not flat, but that is due to the Ender 3, not this glass.
The reason to take it off would be if I do a lot of printing in PLA as the bed adhesion is very strong and the flexible mat which came with the Ender 5 made it easier to remove items from the bed. I cannot use it now because I cannot remove he glass.
As I said above, I have had success with all the materials that I have tried so overall I am very happy with the bed
Have found it does need a semi regular clean to remove any oils from fingers that get on there or prints will lift early.