|Item Model Number||MCA-U000R-KFVK01|
|Product Dimensions||18.4 x 14.2 x 12.1 cm; 410 Grams|
|Item Dimensions L x W x H||18.4 x 14.2 x 12.1 centimetres|
|Item Weight||410 g|
|Is Discontinued By Manufacturer||No|
|Date First Available||9 September 2019|
Other Sellers on Amazon
Coolermaster Universal Vertical GPU Holder Kit Ver.2
Enhance your purchase
- The vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler.
- The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots.
- The position of the GPU can move back and forth to allow cables to pass through chassis with either closed or open PCI slots.
- A high quality Cooler Master version 2 riser cable completes the vertical GPU holder package
Frequently bought together
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
Cooler Master Universal Graphics Card Holder Kit Version 2 Videokartenhalterung
Review this product
Reviews with images
Top reviews from Australia
There was a problem filtering reviews right now. Please try again later.
Update- after a month of use the pcie extension has stopped working (bummer, I'm just outside the return date) so I had to dismantle it. Oh well! It was nice while it worked
Top reviews from other countries
On the plus side, the riser cable is very nice with a metal strip around the outer edge, giving a premium look.
Note; If you have a modern PCIe4 generation GPU, you will need to change your Bios setting from AUTO to Gen3 or get NO picture as currently, most vertical mounts support PCIe3 gen only.
If you do have a heavy GPU then go for the EK one because it has a far superior build and the design includes a support bracket that bolts to the MB mounts.
My case - LianLI 011 Dynamic XL
The issue with this is that it mounts the card a few inches into the case so it might fit right up against your front intake fans or radiator if you have one, for longer cards you risk it not fitting at all.
There is another issue which is that the PCI cable bracket that holds the card up is actually raised off the bottom of the case higher than with other brackets.
This means that the card sits higher in the case than is needed and if you have a large CPU cooler chances are it won’t fit underneath.
In my case I had a Palit 1080 Super Jetstream which is a very large card, and a Noctua U12s in a Fractal meshify C and it just wouldn’t fit underneath the cooler with this bracket.
I changed to the Phanteks bracket and it did fit as the bottom mount sits on the bottom of the case.
Only downside is I had to remove one PCI slot bracket to get the cable in.
So if you have either a very large case or a smaller graphics card then this might work for you but with large cards and midsize cases you might struggle.
GPU does run a bit cooler, but partly due to a side intake slot for air.
It almost contacts my CPU cooler in the vertical position so that was lucky.
Plus nice to just see the GPU face really.
Disappointing as cool master gear is usually good stuff
Therefore cannot recommend and returned