DIGITEN 19mm Waterproof Stainless Steel Blue 12V LED Button Switch Push ON/Off car Boat
|Price:||& FREE Delivery|
- Enter your model number to make sure this fits.
- Material is stainless steel constructed with stainless nut
- Customized, it is better than other common LED button switch in quality.
- Operation type:Self-lock(Toggle),push button to turn on;push button to turn off again
- Working voltage: DC12V, Protection level:IP65
- Mounting hole diameter:19mm(3/4")
- Is Discontinued By Manufacturer : No
- Package Dimensions : 11.2 x 4.3 x 1.6 cm; 19.84 Grams
- Date First Available : 24 May 2018
- Manufacturer : DIGITEN
- ASIN : B0180C0AW2
- Manufacturer reference : CAB12V19MM
- Customer Reviews:
Frequently bought together
Customers who viewed this item also viewed
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
Features & Specifications
Stainless steel constructed with stainless nut
LED working voltage:DC12V.
Mounting hole diameter:19mm.
Depth inc contacts:38.5mm
Operation type:Self-lock(Toggle),push button to turn on;push button to turn off again
LED ON all the time or only ON when switch is ON
Come with O ring seal.
19mm Blue LED Stainless steel power switch x 1
Customers who bought this item also bought
What other items do customers buy after viewing this item?
Review this product
Top reviews from other countries
1. The left and right tabs in the photo power the LED. With 12.7V applied, it was using 8.1mA (0.0081A). The LED illuminated regardless of which way I ran the power through it. That amount of current will take 5 days to burn 1 amp-hour from a battery.
2. The No means "normally open", and the Nc means "normally closed".
3. "Normal" means "when the pushbutton is off". "Open" means the circuit is open and no current flows through, "closed" means the circuit is closed and current flows.
4. The power comes in through the bottom tab, and if the switch is off (button not depressed), power will flow to the top tab (right hand diagram). If the pushbutton is depressed, power will flow to the center tab (left hand diagram).
5. If you want the button illuminated all the time, wire 12V to the left tab and ground the right tab.
6. If you want the button to illuminate when the button is on, connect the center and left tabs (when power goes to the using device, it will also go to the LED power).
7. If you want the button to illuminate when the button is off, connect the top tab to the left tab (when power is shut off to the using device, the top tab will power the LED).
I'm using this to run a 24V lighting setup (2X12V LED lights in series), which should be okay in theory (the switch is theoretically rated for 250VAC), but that much voltage will burn out the LED. Thus, I'll need to find a 12V source if I want to illuminate the push button, and it will be illuminated all the time if I do that.