ELEGOO MEGA2560 R3 Board ATmega2560 ATMEGA16U2 with USB Cable Compatible with Arduino IDE

Your transaction is secure

We work hard to protect your security and privacy. Our payment security system encrypts your information during transmission. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others. Learn more

Brand	ELEGOO
Hardware interface	USB
Hard disk interface	IDE
Colour	Mega2560 Blue
Item weight	0.14 Pounds

About this item

The Mega2560 Board is 100% compatible with Arduino IDE and most shields designed for the mega2560 r3 board.
The chip is Atmega2560-16au and Atmega16u2, same with the official version.
Improved and expert version: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
Stronger RESET circuit.Use 5.5 * 2.1mm DC barrel jack (compatible with 5.5 * 2.5mm DC barrel jack)
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

New (17) from $53.75 & FREE Delivery

Product Information

Colour:Mega2560 Blue

Technical Details

Brand

‎ELEGOO

Manufacturer

‎ELEGOO

Model Number

‎EL-CB-003

Part Number

‎EL-CB-003

Hard Drive Interface

‎IDE

Hardware Interface

‎USB

Number Of Items

‎1

Batteries Included

‎No

Batteries Required

‎No

Has Auto Focus

‎No

Has Programmable Buttons

‎No

Product Dimensions

‎5.51 x 10.49 x 0.99 cm; 63.5 Grams

Item Weight

‎63.5 g

Manufacturer

‎ELEGOO

ASIN

‎B01H4ZLZLQ

Item Model Number

‎EL-CB-003

Is Discontinued By Manufacturer

‎No

Date First Available

‎31 October 2017

Additional Information

Customer Reviews

26 ratings

4.9 out of 5 stars

Best Sellers Rank

12,617 in Computers (See Top 100 in Computers)
84 in Barebone PCs

Customers who viewed this item also viewed

Page 1 of 1 Start overPage 1 of 1

What other items do customers buy after viewing this item?

Page 1 of 1 Start overPage 1 of 1

Have a question?

Find answers in product info, Q&As, reviews

There was a problem completing your request. Please try your search again later.

All Product Information Customer Q&A's Customer Reviews

Product description

Colour:Mega2560 Blue

We have the manufacture factory, making productions and selling by ourselves. So we can control the quality of our productions by ourselves for you. We'd like to receive your valuable suggestions for our products and make your idea come true.

This version is optimized in the original version, mainly for customers under the functional requirements for product quality and high case designed both to ensure consistent and compatible with the original, but also easy to use.

Microcontroller: ATmega2560
Operating Voltage: 5V
Input: Voltage(recommended) :7-12V
Input Voltage (limits) : 6-20V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz

Package includes:
1 x Mega 2560 ATmega2560-16AU Board (Arduino-compatible) 1 x USB cable

From the manufacturer

Elegoo Mega 2560 R3

Elegoo Mega 2560 R3 is an ATmega2560 micro-controller board. It is designed for more complex projects. It would be an intelligent choice of board for 3D printers, robotics projects and more other projects with 54 digital I/O pins (of which 15 can be used as PWM outputs), 16 analog inputs and a larger space for your sketch. This gives your projects plenty of room and opportunities.

Product Details


Extra Points: Besides the 54 digital I/O pins and 16 analog inputs, it also has 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It provides everything needed to support the micro-controller. You will simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.	Simplification and Security: The ATmega2560 on the Elegoo Mega 2560 comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. The Mega 2560 has a re-settable fuse that protects your computer's USB ports from shorts and over-current. Although most computers provide their own internal protection, the fuse provides an extra layer of protection. If more than 500 MA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.	Memory Store: The ATmega2560 of Elegoo Mega 2560 R3 Controller Board has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of Spram and 4 KB of EEPROM (which can be read and written with the Eeprom library).

Diverse Power Methods:

The Elegoo Mega 2560 R3 can be powered via the USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector.

Technical Specification:

Microcontroller: ATmega2560

Controller chip: Atmega2560-16au and Atmega16u2

Operating Voltage: 5V ; Input: Voltage (recommended):7-9V

Digital I/O Pins: 54 (of which 15 provide PWM output)

Analog Input Pins: 16 DC

Current per I/O Pin: 40 mA ; DC Current for 3.3V Pin: 50 mA

Flash Memory: 256 KB of which 8 KB used by bootloader

SRAM: 8 KB EEPROM: 4 KB Clock Speed: 16 MHz LED_BUILTIN: 13

Length: 101.5 mm Width: 53.3 mm Weight: 34 g


	ELEGOO UNO Project Smart Robot Car Kit V 3.0 based on Arduino Platform	ELEGOO Tumbller Self-Blancing Robot Car Kit Compatible with Arduino	ELEGOO Robotic Mini Car Kit Based on Arduino Platform	Elegoo UNO R3 Project Complete Starter Kit with Tutorial for Arduino (63 Items)	Elegoo Mega 2560 Project The Most Complete Starter Kit w/Tutorial for Arduino	Elegoo UNO Project Super Starter Kit with Tutorial for Arduino
Controller Board	UNO R3	NANO	NANO	UNO R3	MEGA2560	UNO R3
Arduino Compatible	✓	✓	✓	✓	✓	✓

Exclusive items from our brands

Page 1 of 1 Start overPage 1 of 1

Customers who bought this item also bought

Page 1 of 1 Start overPage 1 of 1

Customer Questions & Answers

See questions and answers

Customer reviews

5 star		91%
4 star		9%
3 star 0% (0%)		0%
2 star 0% (0%)		0%
1 star 0% (0%)		0%

How are ratings calculated?

Review this product

Write a customer review

Top reviews from Australia

There was a problem filtering reviews right now. Please try again later.

Jack G

Decent Quality, minor issues.

Reviewed in Australia on 7 December 2018

Colour: Mega2560 BlueVerified Purchase

The board came packaged nicely in an anti-static bag with accompanying USB Cable. The board works correctly and seems to use high quality components. The issues, of which there are only two with my board, include bent pin headers and leftover flux from soldering of components. The Flux is only visible on the on some parts of the board but the pin headers are bent slightly to the point where it is made hard to insert large shields and larger board into them.

Other than these two issues the board works fine. I'm unsure if my board is the only exception with these issues but would not hesitate to purchase again.

Helpful

Khoa Tran

Product arrived in great condition and promptly

Reviewed in Australia on 19 January 2021

Colour: Mega2560 BlueVerified Purchase

Very pleased with this product. Despite not being a branded Arduino, it is a great and very affordable substitute, and works exactly as required and is indistinguishable from Arduino Megas, despite being less than a third of the price. Came neatly arrived in a box and anti-static bag, so it would not be damaged in the delivery, and came with a USB cable that seems to function as required.

Helpful

Peter Howard

Great value for money

Reviewed in Australia on 9 May 2019

Colour: Mega2560 BlueVerified Purchase

It seems to be a very well made third party implementation of the open source Arduino Mega board architecture. Nothing at all peculiar about it when I used it for an Arduino clock project. And it's stocked in Australia at a very reasonable price.

Helpful

Good and cheap

Reviewed in Australia on 25 June 2019

Colour: Mega2560 BlueVerified Purchase

Everything works great I’ve been using it for a few days the only problem I have is the pins are very delicate and if I apply to much pressure to the sides they start moving.

Helpful

Brad

Great quality board

Reviewed in Australia on 21 September 2018

Verified Purchase

This board is great quality, with nice finish. It also uses a proper Atmel serial chip rather than the CH340 chip on most other cheap boards. Very happy with it, will purchase in the future.

Helpful

Bryden

A great alternative to Arduino Mega

Reviewed in Australia on 12 July 2018

Verified Purchase

A great alternative to Arduino Mega. Used this for a smart-led set up and everything works as if I had bought an arduino brand.

Helpful

john

Big fan

Reviewed in Australia on 14 February 2020

Colour: Mega2560 BlueVerified Purchase

Becoming a big fan of the Elegoo boards. Affordable and work great

Helpful

Adam

Not on fire like my last one

Reviewed in Australia on 6 December 2018

Colour: Mega2560 BlueVerified Purchase

Best looking mega i have ever bought.
Little touches lead me to think this is well made.

One person found this helpful

Helpful

Top reviews from other countries

Jaren Bourke

Works great for Class Echo

Reviewed in Canada on 4 March 2021

Colour: Mega2560 BlueVerified Purchase

Works great and arrived fast. I used it for my class echo by shakeprint display for my flight simulator.

Amazon Customer jhb

Compatible with Arduino shields

Reviewed in the United States on 11 November 2017

Colour: Mega2560 BlueVerified Purchase

No design hiccup as discussed in another review (header spacing). So far this unit appears plug compatible with the Arduino Mega. It is a nice touch that they include the USB cable. Also, the headers are silk screened on the sides which is helpful. The issue about incorrect spacing in another review is not a flaw, it is keeping the design identical to the original Uno and subsequently, the Mega header spacing. Arduino shields mate up just fine. The attached photo shows an Adafruit LCD shield mated up to the Elegoo.

23 people found this helpful

Doug.

The first came in a kit and has worked fine but it's connectors got a workout so I don't ...

Reviewed in the United States on 26 September 2016

Colour: Mega2560 BlueVerified Purchase

This is my second board from Elegoo. The first came in a kit and has worked fine but it's connectors got a workout so I don't trust it to work long term. This would be the case for any brand MEGA 2560. Anyway I ordered this "new" one from Amazon. The one I got was reworked and has solder flux on the top side of the large Atmel chip plus a little hair tangle about which I removed. After thinking about it, I have no use for this board since I have to know that the board is rock solid since it's going into a system that will hopefully run for many years. So, for me this board has been a big disappointment.
An image is attached. At the top of the large Atmel chip you can see the traces change their reflection as they pass under the solder flux. Also some pins on the top of the chip are skewed just a bit.
Update: Without my asking for a replacement, Elegoo sent me another board. I am changing my rating from 1 star to 4. This replacement board looks and works fine. I really like the labels they have on the side of the connectors showing the pin descriptors. And, since my development was on one of these boards, I have no problem putting it into the system.

33 people found this helpful

Don

very nice clone compared to some other Mega 2560 clones I've ...

Reviewed in the United States on 26 January 2017

Colour: Mega2560 BlueVerified Purchase

This is a very, very nice clone compared to some other Mega 2560 clones I've purchased on Ebay. It has a real crystal oscillator for the main clock, as well as the EN-RESET trace, and a real ATmega16U2 for USB <> serial interfacing. This last point is important if your project requires the Arduino to appear as another USB device type. The 16U2 can be flashed separately from the ATmega itself to accomplish that. The 16U2 chip is supported directly by the Arduino, so no 3rd party driver is required to upload to the board, as with cheaper clones using the CH340 chip.

Compare this to a clone I recently purchased from Ebay. The ISP header was soldered on at an angle, a cheap resonator is used for the clock instead of a crystal, there is no EN-Reset pads (although a cap can be desoldered to do the same thing), and it uses the cheap CH340 USB <> serial chip instead of the Atmel.

The bootloader on the Elegoo seems to be the newer STK500v2. The bootloader is configured to NOT flash the on-board LED while waiting for the upload. It will wait 7 seconds on reset before going to the user code, unless it detects serial comms on the USB port that are not from the Arduino IDE. In that case, it jumps to the user code in under a second once it figures out the IDE is not running the serial port.

A great buy. I will order again. Well worth the addition $2.00 I paid.

25 people found this helpful

NickSab

Finally! I got an arduino - and had it working in minutes.

Reviewed in the United States on 31 January 2019

Colour: Mega2560 BlueVerified Purchase

Arrived in 2 days, and so far, works great. I'm literally only an hour or so into playing around with it, but I wonder why I waited so long. I've long used Raspberry Pi's for several projects, but recently wanted to see what the Arduino has to offer. I downloaded the dev tool from the official site, plugged my new Arduino Mega 2560 into the USB port, and a minute later, was downloading the example Sketch programs. I've since gotten the tone player to work, and a servo as well. While I was very tempted to get one of the kits with all the extras, I honestly have a ton of parts here. The only one I bought in addition was a 4-line LCD. I need to wire that up to test it out. // My one note of advice to anyone working with these types of fragile components (especially in the dryness of winter) - make sure you've discharged any static by touching something grounded before handling circuit boards.

4 people found this helpful

See all reviews

ELEGOO MEGA2560 R3 Board ATmega2560 ATMEGA16U2 with USB Cable Compatible with Arduino IDE

About this item

Product Information

Technical Details

Additional Information

Customers who viewed this item also viewed

What other items do customers buy after viewing this item?

Have a question?

Product description

From the manufacturer

Elegoo Mega 2560 R3

Product Details

Extra Points:

Simplification and Security:

Memory Store:

Diverse Power Methods:

Technical Specification:

Exclusive items from our brands

Customers who bought this item also bought

Customer reviews

Review this product

Top reviews from Australia

There was a problem filtering reviews right now. Please try again later.

Top reviews from other countries