|Operating System||Chrome OS|
|Package Dimensions||11.6 x 7.2 x 3.8 cm; 50 Grams|
|Item Weight||50 g|
|Date First Available||4 April 2019|
KEYESTUDIO W5100 Ethernet Shield for Arduino UN0 R3, MEGA, Network Micro SD Card Slot Expansion Board (Without POE)
Enhance your purchase
- KEYESTUDIO W5100 Ethernet shield connects your Arduino to the internet, turn your arduino into a simple web server or use the Internet to read /write its digital and analog outputs/inputs
- It can turn your Arduino into a simple web server or use the Internet to read /write its digital and analog outputs/inputs.
- The W5100 module adopts stackable design, just plug this W5100 Ethernet module onto your Arduino board and connect it to your network with an RJ45 cable (not included) to get start
- It is directly supported by Arduino official Ethernet Library. It also supports the read &write of mini SD card (TF card).Adds a micro-SD card slot, can be used to store files for serving over the network
- How to use: Search for "keyestudio wiki KS0156" in Google Chrome to get the wiki online tutorial for this product.
Frequently bought together
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
The shield contains a number of informational LEDs.
- L: D13 LED ( D13 light up at HIGH, off at LOW)
- PWR: power led
- LINK: the network is connected. It will flash when send or receive the data
- 100M: the network connection is in 100M/s
- FULLD: the network connection is full duplex communication
- COLL: flashing when the network detects a conflict
- RX: flashing when the network receives data
- TX: flashing when the network sends data
Just plug this module onto your Arduino board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet.
- It's based on the W5100 ethernet chip
- Operating voltage 5V (supplied from the Arduino Board)
- Ethernet Controller: W5100 with internal 16K buffer
- Connection speed: 10/100Mb
- The reset button on the shield resets both the W5100 and the Arduino board.
- Connection with Arduino on SPI port
- The W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections.
- Compatible with all the Arduino/Genuino boards, such as Arduino mega 2560, UNO R3
Nice Ethernet Shield for Arduino, making the controller to access the internet
KEYESTUDIO W5100 Ethernet Shield will allow Arduino Mega 2560/ R3 to connect to the internet. And this ethernet shield based on the Wiznet W5100 ethernet chip. Using the Ethernet library we can write sketches which connect to the internet using the shield.
This ethernet shield contains a micro-SD Card slot which can be used to store files for serving over the network. It can store more files for more advanced projects.
Apparently, for Ethernet support, this shield only uses pins 10, 11, 12, and 13 (SS, MOSI, MISO, SCK), leaving plenty left over for other purposes.
Note: The POE function is not built into this. Search Amazon to find passive POE injector cable sets. They are not expensive, and easy to use. You can only do 10/100 with passive POE because the blue and brown pair are used for power.
Use together with mega board and other sensors
Stack the ethernet shield onto the MEGA2560 board, then upload the code to MEGA 2560 and connect the network cable, open the Google browser and enter the IP address, it will display the analog data.
Note that the display accessories are not included in the shipping, only for reference.
Review this product
Reviews with images
Top review from Australia
There was a problem filtering reviews right now. Please try again later.
By SPILIO on 25 August 2020