BLF Anduril UI Operation Instruction:
Basic Operation: Click for on/off, hold to change brightness. The default mode is SMOOTH RAMP.
Stepped ramping: Steps from one mode to the next using hold. The firmware tries to optimize these steps as equally-spaced on a cube-root curve (considered an ideal mode-spacing by many).
Momentary mode: 5 clicks from OFF to enter Momentary mode, To exit this mode, physically disconnect power (unscrew the light). This mode locks the flashlight into a single-mode interface where the LEDs are only on when the button is held down. It is intended for Morse code and other signaling tasks.
Muggle mode: MUGGLE mode ON: from OFF, 6 clicks to enter MUGGLE mode ON: from OFF, 6 clicks to enter. MUGGLE mode OFF: 6 clicks to exit
Electronic Lockout: 4 clicks form OFF to disable the light, same to re- enable the lamp.
Blinkies & Strobes: Beacon, Candle mode, Bike flasher, Party strobe, Tactical strobe, Lightning storm mode
Anduril UI is a complex UI designed for flashligholics, it takes time to understand all the functions. If you need any assistance, please check the manual, contact service, or search on internet or reset the flashlight to default mode.