|Package Dimensions||29.39 x 16.99 x 12.29 cm; 1.5 Kilograms|
|Item Weight||1.5 kg|
|Is Discontinued By Manufacturer||No|
|Date First Available||17 August 2020|
30V 10A DC Power Supply Variable Switching Regulated 3-Digital Power Supply Single-Output 220V, with Alligator Leads, AU Power Cord
Enhance your purchase
- 🎈【DC Power Supply Variable】💎0-30 Volts and 0-10 Amp current outpouts with alligator clip leads, 3 LED digital display with accuracy: 0.1V and 0.01A.
- 🎈【Multiple Protections】💎Grounding wire, thermal protection, limit current protection,voltage overload and short-circuit protection ensure the safety;Constant voltage and current operation mode (C.C and C.V. automatic conversion),The built-in fan reduce the operation noise, prolonging the life of product effectively.
- 🎈【High quality & Lightweight Design】💎High quality material adopted and make it more stable output, small volume, light weight, easy to carry and move and easy operation.Please contact us freely if you do not know how to set the current and voltage
- 🎈【Wide Application】💎Suitable for the laboratory, electronic, communication equipments maintenance, products line, scientific research and teaching units, Nice gift choice🎁 for DIY hobbyist.
Frequently bought together
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
SKYTOPPOWER STP3010D dc bench power supply is designed for factory maintenance and scientific research, product development, laboratories, schools and electronic production lines. This device is a great ideal DIY tools while you need to repair the car and motorbike or electronics gadget. It is a quite and easy to control item. Both of the output voltage and current are can be continuously adjustable at nominal value. Featuring high accuracy, reliability, perfect overload and short circuit protection circuit.
Input voltage: AC230V±10%,50Hz
Output Voltage: DC 0-30V
Output DC Current: 0-10A
Overall efficiency: ≥85%
Display resolution: voltage: 0.1V , current 0.01A
Dimension: 11.8*5*7.2 inch
Net weight: 2.87 pounds
Working temperature: 0~40°C
Fuse: F6AL, 250VAC
Regulation rate: ≤0.03%+1mV
Load regulation rate: ≤0.3%
Ripple and noise: <80mVp_p
Load regulation rate: ≤0.2%+5mA
Ripple and noise: ≤ 3mArms
Restore: ≤ 300 μ (with load of 50% regulation rate, 0.5A)
Leak current: ≤ 1mA (with input 1500VAC/1s to ground)
Insulant resistance: ≥5MΩ (with input 500VDC/5s to ground)
Relative humidity: ≤80%
What is in the package:
STP3010D power supply device x 1
AU power cord x 1
Alligator clip x 1
User manual x 1
Review this product
Top review from Australia
There was a problem filtering reviews right now. Please try again later.
Haven’t pushed its power limits etc or measured ripple and whatnot, but seems ok for the casual user. Outputs on the display matched my Brymen 235 multimeter.
As others have said, fan speed control seems needlessly aggressive, but doesn’t bother me for my use case.
Top reviews from other countries
I made an external on/off switch for the output, since you can't tell if it's set to too-high a voltage until it's turned on.
The gripe which has been annoying me more and more, though, is that the display is dim. OK indoors, but when I move it into my lockdown lab in the conservatory the display is hard to read even when I shade it.
There doesn't seem to be any brightness adjustment, even if you take the case apart.
Well this is definitely an excellent product and with good customer support. I contacted the seller with a question that they answered almost immediately and the power supply is performing as I expected, charging 18650 cells in a safe manner. The ability to have accurate and variable voltage selection is great as most power supplies are fixed voltages.
I cant say more about the company and the product - it's perfect...
The unit is a little noisy, caused by the fan which starts up well before it's needed. Used it to supply 12volts @ 3amps and the output of the fan was still cool. I suspect this would be annoying if ued on your bench.