|Number of USB 2.0 Ports||1|
TP-Link 48-Port Gigabit Ethernet Unmanaged Switch, Plug and Play, Metal Rackmount, Fan Less, (TL-SG1048)
We don't know when or if this item will be back in stock.
- 48-Gigabit ports provide instant large file transfers
- Innovative energy-efficient technology saves power up to 18%
- 96Gbps Switching Capacity 100% Data filtering rate eliminates all error packets
- Non-blocking switching architecture forwards and filters packets at full wire-speed for maximum throughput Supports MAC address self-learning and auto MDI/MDIX
- TP-Link - World's No. 1 Provider of WLAN Products within last 6 years LEADING SUPPORT - Industry leading 3-year warranty and 24/7 technical support
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
The 48-Port Gigabit Switch TL-SG1048 is designed to meet the needs of the most demanding workgroup and departmental connectivity requirements. A reliable, easy-to-use switch without the complexity of management, the TL-SG1048 provides 48 10/100/1000Mbps ports. The TL-SG1048 combines ease of use with unsurpassed performance resulting in an exceptional value for any cost-conscious network administrator who wants the best possible solution at the best possible price.
From the manufacturer
Just plug and play, no configuring is required. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-negotiation on each port senses the link speed of a network device and intelligently adjusts for compatibility and optimal performance.
Features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.
The TL-SG1048 features non-blocking wire-speed architecture with a 96Gbps switching capacity for maximum data throughput. An 8K MAC address table provides scalability for even the largest networks. It also supports 802.3x Flow Control for full-duplex mode, and back pressure flow control for half-duplex mode alleviates traffic congestion and ensures reliable data transmission.
Review this product
Top reviews from Australia
There was a problem filtering reviews right now. Please try again later.
However I would have liked an Australian power plug, instead I had to remove one from another device to get this running.
Sell in Australia - provide Australian plugs...
Overall great value for money for a smart (semi-managed) PoE switch.
Top reviews from other countries
I was initially happy with this switch, but a few things have come up that have me dropping stars. I can get the POE ports to fail by simply unplugging the cat6 cables, then when you plug the device back in the port no longer works, the only fix is to unplug the switch and hard re-boot it. This seems to happen after it’s been running for a while. Which leads to my second issue, there is no power button, so if your switch is out of the way, pulling the plug to reboot is annoying. Yes, you can restart it through the GUI but that doesn’t always resolve issues. Another gripe, you can’t name your ports, so when looking at the ports to setup other features (VLAN), you need to have your ports memorized to their devices, which isn’t difficult on a home network but annoying. My last issue is with the firmware, the passwords have to be way too short and the last upgrade was a very long time ago. The rest of my old review is below. For the price, it’s still good for a home network, but you get what you pay for.
Expanded my home network with this. I'm running 5 POE cameras plus another 50ft cat6 run to another switch, plus other devices. If you aren't network intelligent the initial setup might be over your head if it doesn't connect to your router right away. Ensure you update the firmware and learn how to use technical forums. Not to scare anyone away but this switch tried to connect on the same IP as my router so you need to connect it directly to a PC first and change it's IP and possibly it's sub-net depending on your network. Does work as described and I'm glad I went with the extra ports as it's much easier to add POE devices now. Fan does always run, annoys me, however it's located out of the way so it's not a deal breaker.