20M Dream Color LED Strip:
* 5050 RGB LED strip: 2x 10M, 32.8ft / reel
* LED Beads: 。30 leds/meter
* Width: 10mm, Thickness: 1mm
* Waterproof rate: IP20
* Operating voltage: 12 V DC
➤DIY & Color Changing Decoration Lighting with wide application
Color changing with 20 colors. 8 light pattern: Quick/Slow/ Auto/ Flash/ 3 color jumpy change/ 7 color jumpy change/ 3 color fade change/ 7 color fade change and R/G/B increase and decrease control. It is ideal for indoor and outdoor lighting decoration, such as kitchen, under cabinet, dining room, bedroom,TV Backlighting, automobile, mirror, balcony, party, patio, automobile, wedding, etc.
➤Self Adhesive Sponge Tape
With the specially designed self adhesive sponge tape, you do not worry about falling off the tape light. Remember to paste it on clean and dry surface
➤Cuttable and Linkable
Led strip light can be cut between every 3 leds without damaging the rest strips. Please Note: The arrows should be connected on the same line. If not, it won't work. You need extra connectors to link the strip for DIY.
1. Before Installation, to prevent overheat, please unwrapped the LED strip before powered! Make sure the surface smooth,clean and dry before applicating the 3M backing tape
2. Connect the strip, the remote control, and the power supply to the correct sequence, pay attention to the connection direction (* arrow to arrow *)
3. Pull out the transparent chip of the 44 keys remote control before use
4. Provide power and start to DIY colors