Ximimark DC 3v-6v to 400kV Boost Step Up Power Module High Voltage Generator 2Pcs
Enhance your purchase
- The high-voltage module is made by using the Tesla coil principle, and outputs high-voltage pulse high-voltage current, small volume, high efficiency, simple peripheral circuit (just need to connect the switch, the battery can be) the discharge intensity is fierce.
- About the power supply: you can use a single 3.7V lithium battery or two series, such as 18650 battery, idle mobile phone battery (to remove the protection board, recommended capacity above 2000mAh) or nickel cadmium / nickel metal hydride battery, 4V or 6V lead acid Battery, etc.
- This module is a finished module for high-voltage inverter transformer/booster with scientific input. After inputting DC3V-7.2V input to the input terminal, DC high voltage of about 200,000 volts can be obtained at the output end (about 1-2 cm arc). There is no ignition point function.
- Wiring: The red line is the positive pole of the power supply, and the output is 2 high temperature and high pressure resistant silicone wires.
- High voltage type: pulse current type.
- Is Discontinued By Manufacturer : No
- Package Dimensions : 10.16 x 7.62 x 2.54 cm; 91 Grams
- Date First Available : 11 October 2018
- Manufacturer : Ximimark
- ASIN : B07JBKCCZ7
- Manufacturer reference : LY154
Best Sellers Rank:
24,939 in Electronics (See Top 100 in Electronics)
- 190 in International Power Adapters
Frequently bought together
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
Input voltage: DC 3V-6V
Input current: 2A-5A
Output voltage: about 200,000 volts (please pay attention to safety when using)
High-voltage two-pole discharge distance: 10mm-20mm
Output high voltage line length: about 100mm
Input power cord length: about 100mm (red line is positive)
Dimensions: Φ24*64mm (1mm=0.0393inch)
The high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) .
Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module.
We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
|5 star (0%)||0%|
|4 star (0%)||0%|
|3 star (0%)||0%|
|2 star (0%)||0%|
|1 star (0%)||0%|