Customer Questions & Answers

Find answers in product info, Q&As, reviews

There was a problem completing your request. Please try your search again later.
All Product Information Customer Q&A's Customer Reviews

Your question might be answered by sellers, manufacturers, or customers who bought this product.

Please make sure that you've entered a valid question. You can edit your question or post anyway.

Please enter a question.

Showing 11-20 of 20 questions
Sort by
  • 0
    vote

    votes
Answer:
The strip has the following channels/circuits, +12V, Red, Green, Blue. So no dedicated white led as far as I can tell.
S
· 7 September 2020
  • 0
    vote

    votes
Answer:
Hi Sir,
Yes, you can use them for both outdoor and bathroom. However, please be careful that the area you place the led is clear, smooth, and straight. If not, the adhesive can not hold the strip properly. If the area is not clear or smooth, you can use silicone holders or clips to place strip. Ip-65 is fully covere… see more
Hi Sir,
Yes, you can use them for both outdoor and bathroom. However, please be careful that the area you place the led is clear, smooth, and straight. If not, the adhesive can not hold the strip properly. If the area is not clear or smooth, you can use silicone holders or clips to place strip. Ip-65 is fully covered with silicone. Therefore, Leds doesn't contact with any water, air or other objects. See less
Hi Sir,
Yes, you can use them for both outdoor and bathroom. However, please be careful that the area you place the led is clear, smooth, and straight. If not, the adhesive can not hold the strip properly. If the area is not clear or smooth, you can use silicone holders or clips to place strip. Ip-65 is fully covered with silicone. Therefore, Leds doesn't contact with any water, air or other objects.

YORUKAU
Seller · 30 September 2020
  • 0
    vote

    votes
Answer:
Hi,
You should use 4 pin connectors to connect the wifi connector and led light strip. There are arrows on both wifi controller and led strip's cable. Match them and remember that the arrows are lined up. Have a nice day!

YORUKAU
Seller · 23 August 2020
  • 0
    vote

    votes
Answer:
yes they are multiple colours but not multi colour at the same time
Yvette Cini
· 23 April 2020
  • 0
    vote

    votes
Answer:
The bag my remote control came in has a 4 pin adaptor in it. There should be 2. It looks like a little black rectangle with 4 pins coming out of both sides. 4 pins connect to the LED strip and the other side connects 2 the white cord attached to the control box. *Note: you need to make sure the arrows on the white cord… see more The bag my remote control came in has a 4 pin adaptor in it. There should be 2. It looks like a little black rectangle with 4 pins coming out of both sides. 4 pins connect to the LED strip and the other side connects 2 the white cord attached to the control box. *Note: you need to make sure the arrows on the white cord and the led strip connector match up.

Also, the app that comes with the lights does not work. You need to download the 'Magic Hue' app. Even with that app it's a bit buggy. See less
The bag my remote control came in has a 4 pin adaptor in it. There should be 2. It looks like a little black rectangle with 4 pins coming out of both sides. 4 pins connect to the LED strip and the other side connects 2 the white cord attached to the control box. *Note: you need to make sure the arrows on the white cord and the led strip connector match up.

Also, the app that comes with the lights does not work. You need to download the 'Magic Hue' app. Even with that app it's a bit buggy.

David
· 14 July 2020
  • 0
    vote

    votes
Answer:
Hi, I’ve connected two, 5 metre strips. No problem with power fluctuations.
Amazon Customer
· 13 April 2020
  • 0
    vote

    votes
Answer:
Yes, sir. YORUKAU Led Strip Lights comes with Australian type “I” plug.
YORUKAU
Seller · 14 July 2020
  • 0
    vote

    votes
Answer:
You need to cut the LED strip in between the 2 gold lines where the scissor icon is. You must only cut on that line. If the bend is 90 degrees then you can just curve the led to fit. but if you need a 90 degree sharp bend or an odd shaped bend or crevice, then you need the correct LED connectors that are sold separatel… see more You need to cut the LED strip in between the 2 gold lines where the scissor icon is. You must only cut on that line. If the bend is 90 degrees then you can just curve the led to fit. but if you need a 90 degree sharp bend or an odd shaped bend or crevice, then you need the correct LED connectors that are sold separately. Or if you want to simply join two LED strips, then you can buy direct connectors. See less You need to cut the LED strip in between the 2 gold lines where the scissor icon is. You must only cut on that line. If the bend is 90 degrees then you can just curve the led to fit. but if you need a 90 degree sharp bend or an odd shaped bend or crevice, then you need the correct LED connectors that are sold separately. Or if you want to simply join two LED strips, then you can buy direct connectors.
David
· 14 July 2020
  • 0
    vote

    votes
Answer:
Not sure. Can check from Amazon help
Malick
· 30 September 2020
  • 0
    vote

    votes
Answer:
Hi Sir,
This is 2x10 meters(32.8Ft.) and has 300 LEDs.

YORUKAU
Seller · 11 July 2020