Top rated in Printer Accessories

Compare the most helpful customer reviews of the best rated products in our Printer Accessories shop. These products are shortlisted based on the overall star rating and the number of customer reviews received by each product in the shop, and are refreshed regularly.

Explore top rated products in Printer Accessories by category

Top rated products in Printer Accessories

product price
4.7 | 719 customer ratings
92% of the ratings are 4-stars or 5-stars
Great for
        Read more
By Georgina H.
LOVE these inks, colours are vibrant no complaints
        Read more
By jenna bricknell
Good quality ink, used for sublimation t-shirts with a great
        Read more
By Nicola
4.5 | 541 customer ratings
88% of the ratings are 4-stars or 5-stars
Quite happy with this filament. It's not a vibrant type of green so if that's what you're after, look elsewhere. I was able to print without pretty much any stringing in all temps from 180-220CNo issues so far. Good filament. Bit pricey
        Read more
By Peter C
Good for the
        Read more
By Scott Aldous
There is a serious wire drawing problem in the use of the product. The problem was solved when I switched to another
        Read more
By nora
4.5 | 435 customer ratings
89% of the ratings are 4-stars or 5-stars
If you're wondering if the noise difference in price is worth it... The only answer here is YES. It's crazy how much quieter my Ender 3 steppers are now.The board comes in OG box with not a whole lot of instructions (they're not really needed). The board is a drop-in replacement for the "noisy" board and after spending some time
        Read more
By Peter C
I purchased this Creality board with the Creality BL Touch Kit. It turns out they are not compatible with each other, and when i plugged the Bl Touch into the dedicated port on the board, it started smoking.Turns out that the wires were not in the correct order, despite both being items offered by Creality.I contacted their support and
        Read more
By KAS
perfect OOB like for like replacement for the stock board, so you can simply plug out cables from the stock board one at a time and plug in on the new board.the only issue I had with the board is the default / official firmware that comes with the board is for Ender 3. The official creality website and the vendor website have firmwares
        Read more
By Amazon Customer
4.6 | 103 customer ratings
91% of the ratings are 4-stars or 5-stars
Purchased a Canon TS5160 Printer, mainly because the all in one printer, scanner etc. I owned had a bill of $180.00 for a set of replacement cartridges, yes $180.00, and if you set it for auto updates, would not use 3rd party (cheap) replacement cartridges.!!!! The Canon Combo Ink Cartridges Twin pack, Black / Multi colour was
        Read more
By Ross Thomas
Liked price for original Canon printer cartridges. The quality of original product is second to none. Didn't like that the price went from $57.84 to $64.97 when I went to order the same product a few weeks later. Why? What has
        Read more
By Giavanni Santomauro
Bought Canon PG640XLCL641XL twin pack. Cartridges work fine but Canon MG3660 actual yield is below advertised yield. At least XL size is more economical. Will rebuy PG640XXL next for this
        Read more
By Joy888
4.7 | 65 customer ratings
94% of the ratings are 4-stars or 5-stars
They do what they are supposed to do. Much stronger than originals so when printer working there is no movement up or down, so no bounce. Didn't notice any quality improvement as the quality was quite good to begin with but they seem to require less adjustment in bed levelling. I check it before every session of printing and while I had
        Read more
By Dikkybee
Great quality bed spring upgrade for my Ender 3. The springs are nice and stiff and the flat coils make them more stable than the stock springs so the bed level tends to stay put longer. The springs themselves are a little longer than the original springs, so I moved my z-axis limit switch up a little (about 3mm?) to compensate. Good
        Read more
By Lix
These are fantastic. Running Ender 3. I have down myself having to level twice weekly and that's dropped to nothing since getting these. I was tossing up between these and the silicon stands but then read these, obviously being springs, can absorb bed crashes from the nozzle where stands won't.Anyhow, they're
        Read more
By Lauren Cameron
4.7 | 60 customer ratings
94% of the ratings are 4-stars or 5-stars
This is a dual pack of ink cartridges - one black (645XL) and one color (646XL).The black ink cartridge is rated as having a yield of 400 pages, while the color cartridge has a rated yield of 300 pages.Of course, these ratings are based on a standardised test. Note the photograph of the packaging.The quality of printing using these
        Read more
By J. M. Fitzpatrick
Genuine product, good value, gets the job
        Read more
By Josh Waldron
Works fine and it’s a pretty decent price even though ink is still wildly over priced. Quick delivery if you have
        Read more
By Stephanie
4.7 | 55 customer ratings
92% of the ratings are 4-stars or 5-stars
Fantastic. So much better than the stock Ender couplers, whose teeth lose their grip on the bowden tube super easily, especially with many retractions.Also, the locking mechanism spring is much better and just feels like better quality all around.A must have upgrade given how cheap and simple it
        Read more
By Jackson
I was unable to print anything with the stock fittings that came with the Ender, the Bowden tube would always just pop right out and filament would no longer be feeding to the hot end. However all that has now been resolved and I am happily away printing thanks to these fittings! Highly recommend to anyone who is having trouble with
        Read more
By Allan Faure
These seem to be handling the job better the stock items on the printer.Based on the other products I have purchased from these guys, I am extremely
        Read more
By Tsim
4.6 | 72 customer ratings
90% of the ratings are 4-stars or 5-stars
I needed some spares so I got this pack, can't complain. They fit perfectly on an Ender3 hot-end, no issues with extrusion.Just note that the seller also sells another pack where there are 5x 0.4mm's and also other sizes - you might wanna get that pack
        Read more
By Peter C
Really good value for the whole set. The nozzles are standard sized so I didn't even have to relevel the bed after changing it out. Tried the 0.8 nozzle so far and it's going really well on my ender 3 pro. Running it at 210c and 30mm/s print, and not having any heat or extrusion issues, or clogs (so far). Adhesion is also good but that's
        Read more
By Jackson
Packaged well and fast delivery.The nozzles are labeled as well so no measuring or working out what is
        Read more
By Jade
product price FREE Delivery on first order. Details
4.7 | 43 customer ratings
93% of the ratings are 4-stars or 5-stars
Recently, I purchased a Canon TS3160 printer, and this is the larger size black ink cartridge for that machine. As you will see in the photo, the rated yield of these cartridges is 400 pages (based on a standardised test).The quality of the printing output is excellent- no doubt attributable to the quality of both the machine and the
        Read more
By J. M. Fitzpatrick
It works and last a little longer then the smaller one - fits into
        Read more
By Mangagirl18
You can use it for my style of printer (Canon PIXMA 2560) it doesn't last as long as they say it does you can drill holes in the top of it and buy refills but it is MESSY and annoying as you have to hold on to the cartridge and squeeze in the ink and they tell you to do it extremely
        Read more
By Amazon Customer
product price FREE Delivery on first order. Details
4.7 | 39 customer ratings
95% of the ratings are 4-stars or 5-stars
Good.Certainly cheap as compared to other
        Read more
By Sumit
Good
        Read more
By Amy
NOT COMPATIBLE WITH MY HP ENVY 5000 series despite being recommended on the HP
        Read more
By Henrique Gomes Mendes
product price FREE Delivery on first order. Details
4.8 | 31 customer ratings
95% of the ratings are 4-stars or 5-stars
Good product great
        Read more
By Ian
⭐⭐⭐⭐⭐
        Read more
By Amazon Customer
Not 100% sure where the issue stems from as I've replaced old cartridges but printer doesn't acknowledge the new ones and doesn't print?!?Put the old ones back in and they both register a slight amount of ink and print albeit faint The same thing with both colour and black tanksPrinter???
        Read more
By elaan
product price FREE Delivery on first order. Details
4.6 | 51 customer ratings
89% of the ratings are 4-stars or 5-stars
Genuine ink, does it's
        Read more
By D. Farmer
⭐⭐⭐⭐⭐
        Read more
By Amazon Customer
See previous
        Read more
By elaan
4.6 | 49 customer ratings
95% of the ratings are 4-stars or 5-stars
I was very happy with the whole process of ordering and the product. The cartridges got delivered within the time promised, and the product arrived safely. My only regret is not ordering more sets!!! The next time I need ink cartridges, I will buy from Myink. There is no need to go shopping when you have found a reliable and cost
        Read more
By Annie Australia
Works as expected and great
        Read more
By Andrew Nestorovic
There are 5 cartridges that are compatible with the canon ts9160. However, it is missing the 6th PB cartridge, which was frustrating because this was the carriage I was out of. You will need to buy it
        Read more
By Han Oh
4.4 | 131 customer ratings
83% of the ratings are 4-stars or 5-stars
The filament is great sticks well to my glass bed. However still use a glue stick for extra adhesion. The filament shines really nicely.ConsI cannot figure out how to sand it witout dampening the colours. Which means i am not sanding the majority of prints so you can see the print lines highlighted by the silky gloss finish.My other
        Read more
By Amazon Customer
This delivery took ages. By the time it arrived I'd forgotten I'd ordered it. No complaints with the product or the price, but I don't think the colour is accurately described. Rather than rose gold, I'd describe it as a shiny brown, or a shiny burnt umber. Wish I could find a true rose gold
        Read more
By Inez Ryan
this filament was a bit of a disappointment so far, I have not used it much. The color is OK but not as deep as on the amazon picture, more lilac. printed the two owls as test print and one feel apart and the other had much marks on its back. going to try a little more now, but seems extremely
        Read more
By M. Nelson
4.7 | 35 customer ratings
92% of the ratings are 4-stars or 5-stars
This cleaning kit contains all of the tools you will need to clean and maintain the print nozzles of most 3d printers.I recommend that the user looks for a video on youtube that demonstrates it in use before using it for the first
        Read more
By Nekochan
Item arrived quickly and everything was in order. Tweezers are sharp and the needles are super handy - could be a bit longer but otherwise is fine. The needles are roughly 40mm long with 35mm
        Read more
By Anthony Zeater
Perfectly packed and received exactly what is advertised. Fast delivery as well very happy about
        Read more
By Jade
4.7 | 31 customer ratings
95% of the ratings are 4-stars or 5-stars
Product came well packaged, works perfectly for my miniatures im printing in the resin printer. Only takes about 10 minutes and my prints are perfectly
        Read more
By Tim
What a great little curing machine.Pretty ingenious that the turn table spins with solar power panels, powered by the UV lights that are curing the
        Read more
By Bryce Fraser
Bought the curing machine for some small resin print projects. Great value for what is offered. Very simple turntable that is covered by the outer cylinder. The turntable is powered by the light emitted from the internal LEDs. My only negative comment is the on/off button. It is really a stop/start button. It does not actually turn the
        Read more
By Adam Grace
4.6 | 35 customer ratings
91% of the ratings are 4-stars or 5-stars
I liked that they were the genuine photocopier cartridges. I disliked the price. It was still too high when you consider I purchased 1 x 640XL & 1 x 641XL both for
        Read more
By Giavanni Santomauro
Doesn’t seem to print very well after 3rd
        Read more
By Cazabel
My Canon printer reacted badly as soon as I replaced the ink, saying a problem with the colour. Ever since I've had to hit the reset and start button to get my printer to work, but without the colour ink, it's fine. I print the same amount each month, yet this lot has lasted only half as long as my
        Read more
By Disie
4.8 | 20 customer ratings
92% of the ratings are 4-stars or 5-stars
I have Creality 3D printers 2xCR-100 and a CR-10 V2. This set was useful for both. Plenty of Bowden Tubing tochange all three machines. Again the silicon covers and .4mm nozzles can be used in both machaines. The PC4-M10 fittings can be used on the Cr-10V2 and both fittings can be used on the CR-100. The cutter was extremely useful in
        Read more
By jeffrey rixon
I honestly think this is great value for the price. I had to replace my tube because of a clog and I love all the spars they give you so you can use some of these items later. Also good to have one of these even if you don't need it just incase your tube
        Read more
By Anna
It didn't fix the problem I'm having so I can't really give it a fair review at this
        Read more
By darren rolph
4.4 | 52 customer ratings
87% of the ratings are 4-stars or 5-stars
I love these inks and they do everything the brand name ones do, this is the 3rd time I have purchased this product. before I discovered these inks I even went out and bought a new printer because it was cheaper to do that instead of buying a set of ink cartridges they have my approval and I give them 5 stars without any
        Read more
By J. L. Bond
This is a great money saver - I have only started using the cartridges, but at this stage there are no problems. Definite value for
        Read more
By Sue
I made sure the ink would be compatible with my printer (as far as my knowledge goes with these things), installed them but cannot get the printer to print. It will copy well and in colour, but won't print from a document. I have no clue why and now I need to buy more in, a different brand, just to get my printer working. Pretty unhappy
        Read more
By Sapphire