To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyses reviews to verify trustworthiness.
Works as advertised with my windows boxes. However, still waiting for El Capitan (MAC) support; Silex email that they are working on this issue with Apple, so a solution if forthcoming. Kudos to Silex with their communication update to users.
I've not had much success with other print servers, I tried a couple and they worked for a while and then stopped. This one seems very stable. I used it for a DYMO 4XL. Once your print driver is installed. You hook up power, hook up the wire from your router, and the USB from your printer and you're on your way. You need one last thing. Its SX Virtual Link Software. This allows it make your computer believe the printer is directly connected to your printer by USB, even though it is on a network. It will say available. When you click on the printer, it will say connected. You can also disconnect and make it available again if you want. Of course, no two computers can use the same USB port.
To solve this problem, if you are on another computer (where you must also have the SX software setup), you click on the Request Use button. I have the release time for each computer set to release in 10 seconds. So, if someone forgot to disconnect the printer from their computer, you can disconnect them from your computer by clicking on request use. It works flawlessly. The one thing I couldn't get it to do was automatically disconnect from the DYMO after it was done printing, but the request use accomplishes it almost as well. Of course, the other approach is to disconnect each time you're done. But, here, one of us uses the DYMO all the time and the other rarely use it. So, it makes sense to stay connected for one and for the other to request use for them to be disconnected.
If this continues to work as well as it has been, it will be the best print server I've bought. The request use button solves any concern that someone might not disconnect and leave and then you'd not be able to use the printer. If it automatically disconnected, it would be even better, but that could be the DYMO and not the unit itself. That might vary from printer to printer. To do all the setup for these features, right click your printer when it shows in the SX software and make changes to the settings under connect and disconnect. They will be fairly obvious.
In short, close to perfect. I say close because it would be absolutely perfect if it automatically disconnected from the DYMO, but its inability is not enough for me to lower it to a 4 because of the many bad servers I have had from mainstream vendors on Amazon, including those rated as top rated.. Also, it's not all that inconvenient to disconnect and connect on each computer. Thought it would be. It isn't. The Request Use just makes that easier and saves you from someone who has forgotten to disconnect. It will count the 10 second down and you will see it is working. The default is 120 seconds. That's too long for DYMO which prints immediately though you may want more than 10 seconds if your printer might print for a while after someone starts printing. This is more expensive and maybe that's why it works better, a bargain given how much trouble I had with other print serves going on and off randomly.
You must have the Silex software running on the machine from which you want to access devices plugged into the DS-510. You can follow the instructions all day, and you won't get to where you need to be. You must search in google and find a link to the Silex website that contains the installation files you will need. Pitiful really that the instructions are worthless. However, once you get it going, the device is wonderful. I even found I can use an old powered USB hub (one old one wouldn't work, another did) and plug in additional thumb and hard drives into it, and they will all show up!
The DS-510 is as flawed as the support and documentation provided by the manufacturer. Having spoken to them prior to my purchase I was assured that the DS-510 would work with a high volume document scanner. However, despite being connected to a gigabit network and having the latest firmware installed, the DS-510 seems to periodically and repeatedly pause transmission of data for 30 secs. When scanning a large number of documents this extends job completion by an amount far in excess of simply using a scanner directly connected via USB to a computer. When accessing the DS-510's built in web server you cannot manually set the device to operate at 1Gb. Instead it must be set to automatic and then you have to confirm from the status page that it is operating at 1Gb. Firmware updates can only be performed from Windows.
Despite what you may see on their website, or hear when calling them, Silex no longer provides telephone support. Also, despite what their product documentation says they do not make software downloads available on their US website. You must use their European website in order to download the software required to use their devices or for firmware updates. This product is both a waste of time and money.
Not compatible with Mac OS 11. I wish they had said this in the product info. I wouldn't have bought one, spent an hour rewiring my printer cabinet and then finally figured out its not compatible after trying to install the software.
Silex, be honest about your product in your product details. Customers shouldn't have to dig through all the product Q&A to discover a major incompatibility like... ALL NEW MACs! You are wasting your customers' time.
"Mojave 10.14 OS and earlier" is not good enough. People are used to installing printer drivers for older versions that mostly still work. You need to be explicit.
As the title says, the DS-510 works seamlessly with those two models of the ScanSnap scanner line. I did have a false alarm after initially connecting the DS-510's ethernet cable to the "PC" port in my VOIP phone (used to connect a PC to the phone's extra ethernet port) and scanning was excruciatingly slow (30 or more seconds to scan a single B&W page). That problem disappeared after plugging the DS-510 directly to an ethernet wall jack.
SUGGESTION FOR SILEX: Could you include a setting in your software to allow the computer to automatically release the USB device after a certain period of inactivity? This would prevent most requests for connected devices. Thank you.
I needed a device to handle a virtual USB audio port, along with serving up standard virtual COM ports, and unlike a few more pricey options, this one worked as advertised. I have had it on my LAN for months and never an issue. I have used it remotely over the WAN too. Solid product. Wish it had one or two more USB ports. I have not tried plugging a USB hub into it yet.
Works well for connecting my external USB drive to my network. You can only have one device connect to it at a time but that works for my situation. I thought having to use software to connect to it would be a pain but it's not. The software is basically one click to connect to the drive and then you're connected the entire time you're on your wireless network.